Dinosaur furnace ignition control board

Description:

Ignition control circuit board; For Coleman / Duo-Therm / Hydro-Flame / Suburban furnaces and Atwood / Mor-Flo / Suburban water heaters; 12 volt DC; With diagnostic LED; 4-1/4 inches long x 3-1/4 inches wide; With post-spark wire connectors; Fuse and overvoltage protection

These universal 12 volt DC ignition boards are certified by Testing Engineers International to meet UL 372 and UL 353 specifications for use in the RV industry. Universal ignition boards are all "electrically" identical but "mechanically" different for convenient installation. These rugged boards use double-sided plated through-hole technology for increased reliability. They are protected by fuses to protect the board from short circuits in the NC and Valve circuits. A bi-color LED monitors the NC and valve terminals to let you know when the board is powered - "GREEN" and when there is power to the valve - "RED". These 3-try delay ignition boards with 20 second purge cycles and LOCAL flame sensing also incorporate an optional jumper. Removing the jumper, for heater and refrigerator use only, converts the board to flash fire with a one-minute purge cycle between three ignition tries.

• Compatibility: Coleman / Duo-Therm / Hydro-Flame / Atwood / Mor-Flo / Suburban Suburban Furnaces and Water Heaters
• Voltage: 12 volt
• Length (IN): 4-1/4 inches
• Width (IN): 3-1/4 inches
• With protective cover: Yes
• Universal 12 volt DC ignition boards are certified by international test engineers to meet UL 372 and UL 353 specifications for use in the RV industry
• A two-color LED monitors the NC and valve terminals to let you know when the board is powered up
• Microcontrolled
• Removable jumper for instant fire operation in water heaters and refrigerators
• Fuse and overvoltage protection
• Use double-sided plated through-hole technology for increased reliability
• Part Number: UIBLPOST